Operator’s Manual 2.5 HP (Max. Developed) 10” Blade 4800 R.P.M. COMPOUND MITER SAW With Laser Trac® Model 137.212140 CAUTION: Before usi
ASSEMBLY AND ADJUSTMENTS ASSEMBLY INSTRUCTIONS To avoid injury, do not connect this miter saw to the power source until it is completely assembled
INSTALLING EXTENSION WINGS (FIG. E) To avoid injury or possible damage to the tool, support long work pieces by installing the extension wings to e
Fig. H INSTALLING BLADE (Fig. F, G, H) 1. Install a 10” blade, making sure the rotation arrow on the blade matches the clockwise
To Adjust Miter Angles: 1. Unlock the miter table by turning the miter handle (1) counterclockwise. 2. While holding the positive-stop locking lev
To avoid injury from an accidental start, make sure the switch is in the OFF position and the plug is not connected to the power source outlet. 45
OPERATION SAFETY INSTRUCTIONS FOR BASIC SAW OPERATIONS BEFORE USING THE MITER SAW To avoid mistakes that could cause serious, permanent injury, d
PLAN YOUR WORK Use the right tool. Don’t force a tool or attachment to do a job it was not designed to do. Use a different tool for any workpiece
TURNING THE SAW ON (Fig. Q) To reduce the likelihood of accidental starting, a thumb activated lock-OFF switch is located on top of the switch hand
MITER CUT (FIG. R) When a miter cut is required, unlock the miter table by turning the miter handle (1) counterclockwise. While holding the miter han
WORKPIECE SUPPORT (FIG. V) Long pieces need extra support. The support should be placed under the workpiece. Keep your hands out of the “no-hands” zo
PRODUCT SPECIFICATIONS Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemic
CUTTING A DIMENSIONAL 4X4 WITH ONE CUT (Fig. X) A dimensional 4x4-in may be cut in half with one cut by attaching an auxiliary wood fence of 3/4 inch
1 CUTTING CROWN MOLDING (FIG. AA, BB) Your compound miter saw is suited for the difficult task of cutting crown molding. To fit properly, crown moldi
MAINTENANCE MAINTENANCE DANGER Never put lubricants on the blade while it is spinning. To avoid fire or toxic reaction, never use gasoline, naphth
TROUBLESHOOTING GUIDE To avoid injury from accidental starting, always turn switch OFF and unplug the tool before moving, replacing the blade or ma
10” MITER SAW PARTS LIST MODEL: 137.212140 When servicing use only CRAFTSMAN replacement parts. Use of any other p
10” COMPOUND MITER SAW MODEL: 137.212140 SCHEMATIC A 25
10” COMPOUND MITER SAW MODEL: 137.212140 PARTS LIST FOR SCHEMATIC B MOTOR I.D. NO. DESCRIPTION SIZE QTY 0HV5 BAL
10” COMPOUND MITER SAW MODEL: 137.212140 SCHEMATIC B MOTOR 27
® Registered Trademark / TM Trademark / SM Service Mark of Sears, Roebuck and Co. ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de
POWER TOOL SAFETY GENERAL SAFETY INSTRUCTIONS BEFORE USING THIS POWER TOOL Safety is a combination of common sense, staying alert and knowing how
COMPOUND MITER SAW SAFETY SPECIFIC SAFETY INSTRUCTIONS FOR THIS COMPOUND MITER SAW 1. USE ONLY CROSS-CUTTING SAW BLADES. When using carbide tippe
ELECTRICAL REQUIREMENTS – cont’d DOUBLE INSULATED The power tool is double insulated to provide a double thickness of insulation between you and
ACCESSORIES AND ATTACHMENTS RECOMMENDED ACCESSORIES Use only accessories recommended for this miter saw. Follow instructions that accompany ac
CARTON CONTENTS UNPACKING YOUR MITER SAW To avoid injury from unexpected starting or electrical shock, do not plug the power cord into
KNOW YOUR COMPOUND MITER SAW Lock off buttonCutting Head Handle Blade Lower Blade GuardUpper Blade Guard Cover P
GLOSSARY OF TERMS CRAFTSMAN COMPOUND MITER SAW TERMS ARBOR LOCK – Allows the user to keep the blade from rotating while tightening or loosening th
Kommentare zu diesen Handbüchern