Craftsman CM1600 Bedienungshandbuch PDF herunterladen (Seite 6)

ASSEMBLY

Your electric pressure washer requires some assembly but is

quickly ready for use.

If you have any problems with the assembly of your pressure

washer, please call the pressure washer helpline at 1-866-902-

9690

UNPACK THE PRESSURE WASHER

1. Remove everything from carton.

2. Ensure you have all included items prior to assembly.

CARTON CONTENTS

Check all contents. If any parts are missing or damaged, call the

pressure washer helpline at 1-866-902-9690.

• Main unit

• Spray gun

• High pressure hose

• Plastic wand

• Quick connect tips (3)

• Parts bag (which includes the following):

• O-ring Kit

• Operator’s manual

Become familiar with each piece before assembling the pressure

washer. Identify all contents with the illustration on page 5. If any

parts are missing or damaged, call the pressure washer helpline

at 1-866-902-9690

ASSEMBLING PRESSURE WASHER

Your Craftsman pressure washer will need assembly before

operation:

1. Lubricate o-rings.

2. Connect pressure hose to spray gun and pump.

3. Connect water supply to pump.

4. Attach wand to spray gun.

5. Attach quick connect spray tip to wand.

Lubricate O-Rings

Lubrication of o-rings is extremely important for installation and

operation. The use of a lubricant (petroleum or synthetic grease)

during assembly helps seat o-rings properly and provides an

improved seal. It also helps protect the o-ring from damage by

abrasion, pinching or cutting and extends the life of the o-ring.

NOTICE ALWAYS apply a small amount of lubricant on

o-rings prior to assembling the high pressure hose (pump end)

and high pressure hose (gun end) (A), wand (gun end) (B), and

garden hose to the pump (C)

Lubricate all connections shown below, following these

instructions:

1. Inspect and clean connecting surfaces prior to lubrication

and assembly.

2. Use lubricants sparingly during assembly; a light ﬁlm is all

that is required.

3. Use a small brush or cotton swab to apply grease directly

to o-rings where they are not accessible (QC ﬁtting, M22

ﬁtting).

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Craftsman CM1600 Bedienungshandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hochdruckreiniger Craftsman CM1600