Craftsman 536.886260 Bedienungsanleitung PDF herunterladen (Seite 9)

ASSEMBLY

8.

9.

7. Install the 3/8” flatwasher and the

3/8” nylon locknut loosely on the

eye bolt.

Carefully remove cotter pin, clevis

pin and universal joint pin from

yoke end of crank rod assembly.

See Figure 6.

Place universal joint into end of

worm gear lining up large holes. In

sert universal joint pin (ensure

opening in pin is in line with

small openings in universal

joint).

10. Place yoke end of crank rod

around universal joint, lining up

openings. Insert clevis pin through

assembly and secure with cotter

pin. Spread ends of cotter pin to

lock in place.

11. Tighten «ut on eye bolt. Make sure

eye bolt is properly aligned and the

crank can freely rotate.

12. Tighten all handle bolts.

Cotter Pin

TO INSTALL SHIFTER KNOB

1. Thread the 1^-13 hex jam nut

found in parts bag onto the threaded

end of the shifter lever. See

Figure 7.

2. Thread the shifter lever knob onto

the threaded end of the shifter le

ver until it is snug against the hex

jam nut and the lip is pointed away

from the engine. Tighten the hex

jam nut against the bottom of the

shifter lever knob to lock in posi

tion.

Hex Jam

Speed

Shifter

Lever

Figure 7

NOTE: If the cables have become dis

connected, reinstall springs as shown in

Figure 8.

F-001088J

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare