Craftsman 79937 Spezifikationen PDF herunterladen (Seite 50)

P a g e | 49

Natural Problems

Condensation

Condensation is natural in a new home because many gallons of water were used in its construction,

such as in the concrete, joint compound, caulking, paint, grout, etc. This water causes higher-than-

normal humidity until the drying process is complete. Daily use of the home also creates moisture. So

dampness in a new home is unavoidable and beyond a home builder’s control. This moisture often

appears as condensation on a glass surface or cool pipe, and may give the false impression that you

have a new leak.

Condensation can be minimized by making sure all attic louvers and crawl spaces are clear of debris

or insect nests. Whenever you create moisture, use exhaust fans in the bathroom, kitchen and utility

area. Opening windows can aid the home-drying process, but it takes time. About one year should be

allowed for your home to “cure”. Do not try to speed up the process by using excessive heat because

high temperatures can warp wood products and cause other types of damage.

Mildew and Fungus

Mildew or fungus will form on a painted surface if your home is subject to abnormally damp

exposures – such as a very heavy rainfall. Mildew or fungus formation cannot be controlled by the

builder. This is a homeowner maintenance item.

If mildew should develop, it can be removed by using a solution consisting of 3 tablespoons of

trisodium phosphate (TSP) and 1 ½ cups of household bleach in one gallon of water. Be sure to wear

rubber gloves. Allow several days to dry before painting.

Settling

Settling is a natural process. All homes settle to some degree. Your home has been engineered to

make this settling as even as possible. Some adjustment in lumber and framing members is normal

and should be expected.

If moldings show slight joints separations, fill the cracks with wood filler. Should nails work out of

position, set them with a hammer and nailset, then fill the holes with wood filler or spackle. Normal

settling, expansion, and contraction also may cause small interior wall cracks around doorways,

archways, and at wallboard joints. It is best to wait one to two years before repairing minor cracks –

until most of the settling and shrinkage is complete. The best time to fill and sand such cracks is when

you repaint.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Keine Kommentare

Craftsman 79937 Spezifikationen Seite 50